The largest selection of generator, water pump, pressure washer, chainsaw, and lawn mower products at the lowest prices anywhere. Powered by Honda, Mitsubishi, Yamaha, Onan, Kawasaki, Robin, Coleman, Porter Cable, Multiquip, Detroit Diesel, Yanmar, Generac, Snapper, Husqvarna, Jonsered, Karcher and more!
Uses standard 18 Ga. brads from 5/4" to 1-1/4" long
Special hardened driver blade
Quick-release nosepiece for fast clearing of jams
Sequential fire trigger
Strong and light weight die-cast body
Anodized magazine with visual reload indicator
Safety located behind the driving guide for driving brads in tight spaces
Depth adjustment for exact setting of nail head
Removable rubber nose protects delicate work
Directional exhaust port
Includes tool, 1/4" male quick coupler with dust cover, OSHA/ANSI approved safety glasses, black carrying case with provision to store 5, 000 brads, box of 1,000 brads, oil and allen wrenches, and operating manual
Shipping Weight: 7.9 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
BN125A
18 Ga. Brad Nails
5/8 - 1-1/4
100 Brads Visual Reload Indicator
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential Fire
8-3/8
10
2-3/8
7.9
MSRP: $232.00
Your Price: $110.26
Model - BN200A: 18 Ga., 2" Brad Nailer Kit
Uses standard 18 Ga. brads from 3/4" to 2" long
Special hardened driver blade
Quick-release nosepiece for fast clearing of jams
Sequential fire trigger
Strong and light weight die-cast body
Anodized magazine with visual reload indicator
Safety located behind the driving guide for driving brads in tight spaces
Depth adjustment for exact setting of nail head
Removable rubber nose protects delicate work
Directional exhaust port
Includes tool, 1/4" male quick coupler with dust cover, OSHA/ANSI approved safety glasses, black carrying case with provision to store 5, 000 brads, box of 1,000 brads, oil and allen wrenches, and operating manual
Shipping Weight 9.3 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
BN200A
18 Ga. Brad Nails
3/4 - 2
100 Brads Visual Reload Indicator
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential Fire
9-5/8
10-1/8
2-3/4
9.3
MSRP: $330.00
Your Price: $168.91
Model - FN250B: 16 Ga., 2-1/2" Finish Nailer Kit
Uses standard 16 Ga. Finish nails from 3/4" to 2-1/2" long (will accommodate 3/4" to 1-1/4" with supplied magazine insert
Special hardened driver blade
Depth-of-drive adjustment to match application
Quick-release nosepiece
Removable rubber safety nose
Strong and light weight die-cast body
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Rugged top-load aluminum magazine
Includes nailer, magazine insert to adapt for 3/4" to 1-1/4" nails, 1/4" male quick coupler with dust cover, OSHA/ANSI approved safety glasses, black carrying case with provision to store 2,500 nails, box of 1,000 finish nails, oil and allen wrenches, and operating manual
Shipping Weight: 10.3 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
FN250A
16 Ga. Finish Nails
3/4 - 1-1/4 1-1/2 - 2-1/2
100 Nails
Lever Release Latch
Hinged Lever Type Quick Release Nose
70-120 PSI
Sequential and Bump Fire
11-1/8
13-1/4
4-1/4
10.3
MSRP: $400.00
Your Price: $211.14
Model - DA250A: 15 Ga., 2-1/2" Angle Nailer Kit
Uses Senco-type 15 Ga. angle finish nails from 1-1/4" to 2-1/2" long
Special hardened driver blade
Depth-of-drive adjustment to match application
Rubber safety tip prevents marring of work
Quick-release nosepiece for fast clearing of jams
Muffled, adjustable exhaust port
Strong and light weight die-cast body
Aluminum magazine with hardened steel nail guide rail
Includes tool, 1/4" male quick coupler with dust cover, OSHA/ANSI approved safety glasses, black carrying case with provision to store 1,000 angle finish nails, box of 1,000 nails, oil and allen wrenches, and operating manual
Shipping Weight: 17.4 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
DA250A
15 Ga. Senco-type Angle Finish Nails
1-1/4 - 2-1/2
100 Nails
Lever Release Latch
Hinged Lever Type Quick Release Nose
70-120 PSI
Sequential and Bump Fire
11-7/8
13-1/4
6
17.4
MSRP: $153.20
Your Price: $84.46
Model - US58: 22 Ga., 5/8" Upholstery stapler Kit
22 Ga., 5/8" Upholstery stapler Kit, Model #US58
Small and light weight for ease of operation
3/4" nose extension for limited clearance fastening
Steel top cap for durability
Rear exhaust port channels air away from work
Driver guide moves back with magazine, so when magazine is opened, a jam can easily be cleared
Uses standard Senco "C" Type, 22 Ga., 3/8" crown staples from 1/4" to 5/8" long
Convenient bottom-load magazine holds 185 staples
Includes stapler, 1/4" coupler w/ dust cap, OSHA/ANSI approved safety glasses, oil and allen wrenches, and operating manual
Shipping Weight: 4.7 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
US58
22 Ga. 3/8 Crown Staple
1/4 - 5/8" leg
185 Staples
Drop Type
-
70-120 PSI
Trigger
6
9
1-3/4
4.7
MSRP: $170.00
Your Price: $82.11
Model - NS100A: 18 Ga., 1" Narrow Crown stapler Kit
Uses standard 18 Ga. 1/4" crown staples from 1/2" to 1" long
Special hardened driver blade with quick-release nosepiece
Sequential fire trigger
Strong and light weight die-cast aluminum body
Safety located behind the driver guide for driving staples in tight spaces
Depth adjustment for exact setting of nail head
Removable rubber nose protects delicate work
Directional exhaust port
Standard equipment: 1/4" male quick coupler with dust cover, OSHA/ANSI approved safety glasses, black carrying case with provision to store 5,000 staples, box of 1,000 staples, oil and allen wrenches, and operating manual
Shipping Weight: 8 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
NS100A
18 Ga. 1/4 Crown Staple
1/2 - 1 leg
100 Staples
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential Fire
8-1/2
10-1/4
2-3/8
8
MSRP: $246.00
Your Price: $107.92
Model - NS150A: 18 Ga., 1-1/2" Narrow Crown stapler Kit
Uses standard 18 Ga. 1/4" crown wire staples from 1/2" to 1-1/2" long
Special hardened driver blade with quick-release nosepiece
Strong and light weight die-cast body
Rugged top-load magazine with steel staple rail
Safety located behind the driver guide for driving staples in tight spaces
Depth adjustment for exact setting of nail head
Removable rubber nose protects delicate work
Directional exhaust port
Standard equipment: 1/4" male quick coupler with dust cover, OSHA/ANSI approved safety glasses, black carrying case with provision to store 5,000 staples, oil & allen wrenches, box of 1,000 staples, and operating manual
Shipping Weight: 8.1 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
NS150A
18 Ga. 1/4 Crown Staple
1/2 - 1-1/2 leg
100 Staples
Lever Release Latch
Lever Type Quick Release Nose
70-120 PSI
Sequential and Bump Fire
9-5/8
10-3/8
2-1/2
8.1
MSRP: $466.00
Your Price: $256.89
Model - MS200: Medium Crown stapler
Drives "N" wire 16 Ga. 7/16" crown construction staples from 1" to 2" long
Powerful piston with ring design that prevents cylinder bore scuffing - lasts far longer than conventional "O" rings
Adjustable exhaust diffuser
Open top-load magazine with push-button follower accommodates two 70-staple strips or three 50-staple strips
Quick release nosepiece for easy clearing of jams
Depth-of-drive adjustment to enable fastening without staple drive-through
Standard Equipment: stapler, 3/8" NPT air inlet w/ 1/4" male quick coupler with dirt and dust cover, OSHA/ANSI approved safety glasses, black carrying case, oil and allen wrenches, and operating manual
Shipping Weight: 13.5 lbs
Model #
Fastener Type
Fastener Range (Inches)
Magazine Capacity
Magazine Release
Jam Clearance
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
MS200
16 Ga. 7/16 Crown Staple
1" - 2" leg
150 Staples
Lever Release
Lever Type Latch
70-120 PSI
Sequential and Quick Release Nose
10-3/4
14-1/8
5-7/8
13.5
MSRP: $510.00
Your Price: $279.18
Model - RN175: Roofing Coil Nailer
Drives standard .120 Dia., 15 degree wire-collated roofing nails from 7/8" to 1-3/4" long
Will fasten a full bundle of shingles without reloading
Powerful, high performance motor with adjustable exhaust diffuser
Refined feed mechanism includes double cams and guides and quick-adjust support for all nail lengths
Steel safety foot with dual carbide inserts and adjustable shingle guide
Steel protectors with rubber inserts protect tool and stop sliding
Quick-click depth-of-drive adjuster
Standard equipment: nailer, 3/8" NPT air inlet with 1/4" male quick coupler with dirt and dust cover, OSHA/ANSI approved safety glasses, oil and allen wrenches, and operating manual
Shipping Weight: 10.9 lbs
Model #
Fastener Type (Inches)
Fastener Range
Magazine Capacity
Magazine Release
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
RN175
.120, 15 degree Roofing Nails
7/8 - 1-3/4
120
Lever Release Latch
70-120 PSI
Contact Trip or Dual Action
10-1/8
11-3/4
5.1
10.9
MSRP: $510.00
Your Price: $242.82
Model - FC350: Clipped Head Framing Nailer Kit
Uses standard 32 degree to 34 degree paper collated clipped-head stick nails from 2" to 3-1/2" x .113" to .131"
Rugged aluminum magazine holds two nail strips at at time
Depth-of-drive adjustment to match application
Barbed nose for easy toe nailing…also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Includes nailer, 3/8" male quick coupler with dirt and dust cover, OSHA/ANSI approved safety glasses, black carrying case, oil and allen wrenches, and operating manual
Shipping Weight: 17.2 lbs
Model #
Fastener Type
Fastener Range
Magazine Capacity
Magazine Release
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
FC350
Clipped Head
.113 x 2 .131 x 3-1/2
97 nails
Lever Release Latch
70-120 PSI
Sequential and Bump Fire
15
19-1/2
7-1/2
17.2
MSRP: $510.00
Your Price: $242.82
Model - FR350: Round Head Framing Nailer Kit
Uses standard 22 degree plastic collated full-round-head stick nails from .113" x 2" to .131" x 3-1/2" (also .148" x 2-1/4" to 3")
Rugged aluminum magazine holds two nail strips at at time
Depth-of-drive adjustment to match application
Barbed nose for easy toe nailing…also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Includes nailer, black carrying case, 3/8" male quick coupler with dirt and dust cover
Shipping Weight: 18.6 lbs
Model #
Fastener Type
Fastener Range
Magazine Capacity
Magazine Release
Operating Pressure
Firing Modes
Height (Inches)
Length (Inches)
Weight (Lbs)
Shipping Weight (Lbs)
FR350
Round Head
.113 x 2 .131 x 3-1/2
72 nails
Lever Release Latch
70-120 PSI
Sequential and Bump Fire
14
19-1/2
7-1/2
18.6
MSRP: $532.00
Your Price: $282.70
Model - FR350MAG: Magnesium Round head Framing Nailer
Uses standard 22 degree plastic collated full-round-head stick nails from 2" to 3-1/2" x .113" to .131" and 2-1/4" to 3" x .148"
Light-weight magnesium housing
Rugged aluminum magazine holds two nail strips at a time
Nail lockout mechanism alerts operator to reload tool
Jam release knob located on magazine
Depth-of-drive adjustment to match application
Barbed nose for easy toe nailing...also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhuast port
Standard Equipment: Nailer, 3/8" male quick coupler with dirt and dust cover, OSHA/ANSI approved safety glasses, oil & allen wrenches, and operating manual
Shipping Weight: 11.4 lbs
MSRP: $610.00
Your Price: $307.33
Model - COIL350: 3-1/2" Magnesium Coil Framing Nailer
Drives standard 15 degree wire-collated coil framing nails from 1-1/2" to 3-1/2" x .099" to .131"
Light-weight magnesium housing
Powerful, high performance motor with adjustable exhuast
Refine feed mechanism includes double cams and guides and quick-adjust support for all nail lengths
Quick-click depth-of-drive adjuster
Standard Equipment: Nailer, 3/8" NPT air inlet with 1/4" male quick coupler with dirt and dust cover, OSHA/ANSI approved safety glasses, oil & allen wrenches, and operating manual
Shipping Weight: 11.6 lbs
MSRP: $615.00
Your Price: $303.81
Model - COIL250: 2-1/2" Framing Nailer
Drives standard 15 degree wire-collated coil framing nails from 1-1/2" to 2-1/2" x .099" to .120"
Light-weight housing
Powerful, high performance motor with adjustable exhuast
Refine feed mechanism includes double cams and guides and quick-adjust support for all nail lengths
Quick-click depth-of-drive adjuster
Standard Equipment: Nailer, 3/8" NPT air inlet with 1/4" male quick coupler with dirt and dust cover, rugged carrying case, oil & allen wrenches, and operating manual
Shipping Weight: 12.6 lbs
MSRP: $880.00
Your Price: $478.59
Model - FCN200: 2" Flooring Cleat Nailer
Drives from 1 1/2" - 2" "L" shape cleat nails
Strong, lightweight, die-cast aluminum construction with steel magazine base
Non-Marring base is designed to allow driving of fastners close to wall
better balance for stability - tool sits upright for smoother floor installation
fitted is angled so hose dose not interfere with magazine or operator
Eronomic design with longer handle for easier use
Unit comes fully assembled and ready for use right out of the box
Hardened driver blade for longer life
provides better holding power while allowing the floor to contract and expand
Pneumatic driving action consistently drives fastners for better finished installation
Includes: Nailer, mallet, air tool oil, Allen wrenches, 1/4" industrial male plug, and owner's manual
Shipping Weight: 18 lbs
MSRP: $463.00
Your Price: $239.00
Model - CFBN125A: 1-1/4" Brad Nailer and 2 HP Compressor
18 Ga. Brad Nailer with:
Qucik-release nose piece
Hardened driver blade
Depth-of-drive adjustment
Durable, rear-load magazine
Muffled, adjustable exhaust port
2 HP, 6 Gal. Pancake Compressor with:
15 Amp, 120 VAC, 2 HP motor
Oil-free design for less maintenance
Ability to run on standard household current
3.7 SCFM @ 40 psi - 2.7 SCFM @ 90 psi
Includes nailer #BN125A 2HP, 6Gallon, compressor, 25', 300 psi air hose with ferrules on both ends, 1/4" male and female couplers, Teflon(R) pipe joint tape, 1000 brad nails, oil, wrenches, safety glasses, black shroud, black carrying case, and operating manuals
Shipping Weight: 54 lbs
MSRP: $490.00
Your Price: $236.95
Model - FR350NC: Round Head Framing Nailer Kit
Uses standard 22 degree plastic collated full-round-head stick nails from .113" x 2" to .131" x 3-1/2" (also .148" x 2-1/4" to 3")
Rugged aluminum magazine holds two nail strips at at time
Depth-of-drive adjustment to match application
Barbed nose for easy toe nailing…also includes rubber foot pad sheathing and decking
Large air chamber for added power
Ergonomic handle with rubber grip
Muffled, adjustable exhaust port
Includes nailer, 3/8" male quick coupler with dirt and dust cover
fitted is angled so hose dose not interfere with magazine or operator
Eronomic design with longer handle for easier use
Unit comes fully assembled and ready for use right out of the box
Hardened driver blade for longer life
provides better holding power while allowing the floor to contract and expand
Pneumatic driving action consistently drives fastners for better finished installation
Includes: Nailer, mallet, air tool oil, Allen wrenches, 1/4" industrial male plug, and owner's manual
Shipping Weight: 18 lbs
MSRP: $590.00
Your Price: $309.00
Model - CFFN250A: 2-1/2" Finish Nailer & 2HP Compressor Kit
16 Ga. Finish Nailer with:
Quick-release nose piece
Hardened driver blade
Depth-of-drive adjustment
Durable, top-load magazine
Muffled, adjustable exhaust port
2 HP. Peak 6 Gal. Pancake Compressor with:
15 Amp, 120 VAC, 2HP peak motor
Oil-free design for less maintenance
Ability to run on standard household current
3.7 SCFM @ 40psi - 2.6SCFM @ 90 psi
Includes: nailer, compressor, 25', 300psi air hose with ferrules on both ends, 1/4" male and female couplers, Teflon pipe joint tape, 1000 finish nails, oil, wrenches, safety glasses, and operating manuals
The ideal kit for the finish trim installer:
On-Site trim Work, Architectural Woodwork Installation, Case Work Installation
Shipping Weight: 54 lbs
MSRP: $883.00
Your Price: $489.00
Model - CPFFR350: Round-Head Framing Nailer Combo Kit
2" TO 3-1/2" x .113" TO .148" Round-head framing nailer
Uses standard 20-22 degree plastic collated nails
3 peak HP, 4 gallon "side stack" compressor
Oil-free design - No oil spillage or work contamination
