| | GENERATOR SUPERSTORE | | The largest selection of generator, water pump, pressure washer, chainsaw, and lawn mower products at the lowest prices anywhere. Powered by Honda, Mitsubishi, Yamaha, Onan, Kawasaki, Robin, Coleman, Porter Cable, Multiquip, Detroit Diesel, Yanmar, Generac, Snapper, Husqvarna, Jonsered, Karcher and more! |
| |
| | Powered by Honda Generators | Kawasaki Generators
Porter Cable Generators | Powerstation Generators
Yamaha Generators | On-Line Catalog
Generators | Pressure Washers | Power Tools
PORTER CABLE AIR COMPRESSORS
|  |  MSRP: $337.00 Your Price: $178.00 | | Model - CPFAC2600P | - 2 HP(peak), 6 gallon "pancake" style tank air compressor
- Oil free pump design for durability and no maintanence
- Improved longer life motor with replaceable brushes
- High flow air regulator allows more work at higher air pressure
- Higher operating pressure at 120 PSI start and 150 PSI stop
- High output of air:3.7 SCFM @ 40 PSI/2.6 SCFM @ 90 PSI
- 120 Volt, lightweight universal motor starts easily under low voltage conditions
- CETL listed with ASME safety valve to meet all codes
- Weight: 44 lbs
- Dimensions (LWH)
19 x 18.5 x 18.5
|
|  MSRP: $415.00 Your Price: $224.00 | | Model - CPF23400P | - 3 HP(peak), 4 gallon contractor "pancake" style tank, air compressor
- oil free pump design for durability and no maintanence
- Two pole, 3450RPM induction motor for maximum air delivery
- High flow air regulator allows more work at higher air pressure
- Higher operating pressure at 110 PSI start and 135 PSI stop
- High output of air: 7.7 SCFM @ 40 PSI/5.3 SCFM @ 90 PSI
- Weight: 74 lbs
- Dimensions (LWH)
17.5 x 17.5 x 22.25
|
|  MSRP: $463.00 Your Price: $238.00 | Model - CFBN125A:
1-1/4" Brad Nailer and 2 HP Compressor Kit | - 18 Ga. Brad Nailer with:
- Quick-release nose piece
- Hardened driver blade
- Depth-of-drive adjustment
- Durable, rear-load magazine
- Muffled, adjustable exhaust port
- 2 HP, 6 Gal. Pancake Compressor with:
- 15 Amp, 120 VAC, 2 HP motor
- Oil-free design for less maintenance
- Ability to run on standard household current
- 3.7 SCFM @ 40 psi - 2.7 SCFM @ 90 psi
- Includes nailer #BN125A 2HP, 6Gallon, compressor, 25 foot, 300 psi air hose with ferrules on both ends, 1/4" male and female couplers, Teflon(R) pipe joint tape, 1000 brad nails, oil, wrenches, safety glasses, black shroud, black carrying case, and operating manuals
- Weight: 54 lbs
- Dimensions (LWH)
21.5 x 18 x 18.25
|
|  MSRP: $466.00 Your Price: $248.00 | | Model - CPF23400S | - 3 HP(peak), 4 gallon contractor "side stack" style tank, air compressor
- oil free pump design for durability and no maintanence
- Two pole, 3450RPM induction motor for maximum air delivery
- High flow air regulator allows more work at higher air pressure
- Higher operating pressure at 110 PSI start and 135 PSI stop
- High output of air: 7.7 SCFM @ 40 PSI/5.3 SCFM @ 90 PSI
- Protected panel mounted air controls and outlets
- Two industrial style quick connect bodies in air outlet panel
- UL listed with ASME safety valve to meet all codes
- Weight: 82 lbs
- Dimensions (LWH)
21 x 20 x 19.5
|
|  MSRP: $590.00 Your Price: $308.00 | | Model - CFFN250A: 2-1/2" Finish Nailer & 2HP Compressor Kit | - 16 Ga. Finish Nailer with:
- Quick-release nose piece
- Hardened driver blade
- Depth-of-drive adjustment
- Durable, top-load magazine
- Muffled, adjustable exhaust port
2 HP. Peak 6 Gal. Pancake
Compressor with: - 15 Amp, 120 VAC, 2HP peak motor
- Oil-free design for less maintenance
- Ability to run on standard household current
- 3.7 SCFM @ 40psi - 2.6SCFM @ 90 psi
- Includes: nailer, compressor, 25', 300psi air hose with ferrules on both ends, 1/4" male and female couplers, Teflon pipe joint tape, 1000 finish nails, oil, wrenches, safety glasses, and operating manuals
- The ideal kit for the finish trim installer:
On-Site trim Work, Architectural Woodwork Installation, Case Work Installation - Weight: 54 lbs
- Dimensions (LWH)
23 x 18.5 x 18.5
|
|  MSRP: $738.00 Your Price: $388.00 | Model - CPFC2TV3525VP
25 Gallon Vertical Portable Air Compressor | - 175 PSI - 60 gallon equivalent tank size as compared to conventional 125 PSI model
- 25 gallon, vertical portable air compressor
- High-flow air regulator (145 PSI start and 175 stop)
- Provides highest level of moderate-to-heavy duty, intermittent tool operations in its class
- Direct-drive, twin-cylinder, oil-free design for durability and no maintenance
- 120 Volt induction, high-torque motor for reliable starting
- Longer life and quieter operation with "4 Pole" 1725 RPM motor
- Large air regulated pressure gauge for easy visibility
- Cushioned handle for comfortable grip
- Shroud with intergrated air tank filter improves cooling
- ASME constructed air tank and safety valve to meet all codes
- Standard Equipment: Compressor, ASME safety valve, air regulator and guages, 1/4" quick coupler, and operating manual
- Weight: 159 lbs
- Dimensions (LWH)
22.5 x 22.5 x 51
|
|  MSRP: $753.00 Your Price: $413.00 | | Model - CPLC7060V | - 7 HP(peak), 60 gallon stationary oil lube compressor
- vertical tank
- 220 Volt induction motor with manual thermal overload protection
- Higher operating pressure for more work. 110 PSI start and 135 PSI stop
- High output of air: 12.1 SCFM @ 40 PSI/9.7 SCFM @ 90 PSI
- Cast iron cylinder sleeves
- Pump contains automotive style pistons, rings and connecting rods
- Large tank pressure guage
- Full-size belt guard
- Patented automatic belt tensioning device
- CUL listed with ASME constucted air tank and safety valve to meet codes
- Weight: 245 lbs
- Dimensions (LWH)
31.5 x 28.75 x 69.25
|
|  MSRP: $883.00 Your Price: $488.00 | | Model - CPFFR350: Round-Head Framing Nailer Combo Kit | - Uses standard 20-22 degree plastic collated nails
- 2" - 3-1/2" Round-head framing nailer
- 2 HP, 4 gallon side stack compressor
- oil-free design - No oil spillage or work contamination
- High SCFM output (8.3 SCFM @ 40psi & 6.1 SCFM @ 90 psi)
- Ready to run, including ASME safety valve, air regulator & guages, 1/4" quick couple, 1/4" male & female fittings and Teflon pipe joint tape
- 3/8" x 25" 300PSI WP air hose with 1/4" NPT x 3/8" male brass fitting secured with ferrules on both ends
- The ideal kit for the framer
-Framing
-Decking
-General carpentry - Weight: 110 lbs
- Dimensions (LWH)
27.5 x 19.75 x 24.25
|
|  MSRP: $938.00 Your Price: $494.00 | Model - CPFC2TV3520W
20 Gallon Air Compressor | - 175 PSI - 49 gallon equivalent tank size as compared to conventional 125 PSI model
- 20 gallon, contractor, portable air compressor
- High-flow air regulator (145 PSI start and 175 stop)
- Provides highest level of moderate-to-heavy duty, intermittent tool operations in its class
- 120 Volt induction, high-torque motor for reliable starting
- Longer life and quieter operation with "4 Pole" 1725 RPM motor
- Moveable "quadraport" station permits remote air regulation and control closest to the work; includes 4 quick connect bodies and a high flow regulator
- Fold down handle for ease of storage and transportation
- Shroud with intergrated air tank filter improves cooling
- ASME constructed air tank and safety valve to meet all codes
- Standard Equipment: Compressor, ASME safety valve, air regulator and guages, 1/4" quick coupler, and operating manual
- Weight: 139 lbs
- Dimensions (LWH)
39 x 18 x 36
|
|   MSRP: $1276.00 Your Price: $695.00 | Model - CPL55GH8W
5.5 HP 8 Gallon Air Compressor | - 135 PSI - 10 gallon equivalent tank size as compared to conventional 125 PSI model
- Honda GX series 5.5 HP (Gas), 8 gallon wheelbarrow compressor
- Oil-lubricated pump designed with aluminum body and head for best cooling and cast iron cylinder sleeves for best wear
- pump contains automotive-style pistons, rings, and connecting rods
- High-flow air-regulator for more work at higher pressure (110 PSI start and 135 PSI stop)
- Large air regulated pressure guage for easy visibility
- 8 gallon air tank supports heavy usage of brad and finish nailers, staplers, moderate-to-heavy roofing and moderate framing nailer use
- all copper tubing and metal belt guard
- Standard Equipment: Compressor, ASME safety valve, air regulator and guages, 1/4" quick coupler, and operating manual
- Weight: 189 lbs
- Dimensions (LWH)
43 x 22 x 23
|
|  MSRP: $1,500.00 Your Price: $815.00 | | Model - CPLKC7080V2 | - 7 HP(peak), 80 gallon stationary oil lube compressor
- vertical tank
- 220 Volt induction motor with manual thermal overload protection
- Higher operating pressure for more work. 145 PSI start and 175 PSI stop
- High output of air: 17.3 SCFM @ 40 PSI/16.8 SCFM @ 90 PSI
- Wire belt guard
- Cast iron cylinder
- Pump contains automotive style pistons, rings and connecting rods
- Large tank pressure guage
- No magnetic starter required
- CUL listed with ASME constucted air tank and safety valve to meet codes
- Weight: 422 lbs
- Dimensions (LWH)
34 x 31 x 75.5
|
|
Home|Products|Order|Company Info|Contact | |
|
|
