GENERATOR SUPERSTORE
The largest selection of
generator, water pump, pressure washer, chainsaw, and lawn mower
products at the lowest prices anywhere. Powered by Honda, Mitsubishi,
Yamaha, Onan, Kawasaki, Robin, Coleman, Porter Cable, Multiquip,
Detroit Diesel, Yanmar, Generac, Snapper, Husqvarna, Jonsered, Karcher
and more!
Powered by Honda Generators | Yamaha
generators | Kawasaki generators Porter
Cable generators | PowerStation
generators | On-Line Catalog
Generators | Air Compressors | Pressure Washers
ENGINE
DRILLS - CLICK HERE
PORTER CABLE DRILL MODELS NOT AVAILABLE
Model - 2620: 3/8" Drill
4.5 Amps, AC only
0-1,200 RPM
Variable speed, reversing
Capacities: 3/4" wood, 3/8" steel
Heavy-duty 2-stage gearing
100% ball & needle bearings
Cast aluminum machined gear housing
& bearing plate
Dust sealed switch
Standard Equipment: Chuck Key
#826226 and operating manual
Shipping Weight: 5 lbs
Model #
Power
Motor Amps
Motor Watts
Chuck Size
Gear Reduction
Speed (RPM)
Drilling Capacity (Wood)
Drilling Capacity (Steel)
Length (Inches)
Net Weight (Lbs)
Shipping Weight (Lbs)
2620 120 VAC, 50-60 HZ 4.5 540 3/8 2-Stage 0-1,200 10-1/4" 3/4" - 3-3/4 5
Model - 6614: 1/2" Drill
5.5 Amps, AC only
0-750 RPM
Variable speed, reversing
Capacities: 1-3/4" wood, 1/2" steel
Extra-heavy-duty 3-stage gearing
100% ball & needle bearings
Cast aluminum machined gear housing
& bearing plate
Dust sealed switch
Standard Equipment: Chuck Key
#810543 and operating manual
Shipping Weight: 6 lbs.
Model #
Power
Motor Amps
Motor Watts
Chuck Size
Gear Reduction
Speed (RPM)
Drilling Capacity (Wood)
Drilling Capacity (Steel)
Length (Inches)
Net Weight (Lbs)
Shipping Weight (Lbs)
6614 120 VAC, 50-60 HZ 5.5 660 1/2 3-Stage 0-750 1-3/4" 1/2" 11-1/2 4-3/4 6
Model - 2621: 3/8" Drill
4.5 Amps, AC only
0-1,200 RPM
Variable speed, reversing
Heavy-Duty Jacobs Hand-Tite keyless
chuck with high-grip jaws
Capacities: 3/4" wood, 3/8" steel
Heavy-duty 2-stage gearing
100% ball & needle bearings
Cast aluminum machined gear housing
& bearing plate
Dust sealed switch
Includes operating manual
Shipping Weight: 5 lbs.
Model #
Power
Motor Amps
Motor Watts
Chuck Size
Gear Reduction
Speed (RPM)
Drilling Capacity (Wood)
Drilling Capacity (Steel)
Length (Inches)
Net Weight (Lbs)
Shipping Weight (Lbs)
2621 120 VAC, 50-60 HZ 4.5 540 3/8 2-Stage 0-1,200 10-1/4" 3/4" - 3-3/4 5
Model - 6615: 1/2" Drill
5.5 Amps, AC only
0-750 RPM
Variable speed, reversing
Heavy-Duty Jacobs Hand-Tite keyless
chuck with high-grip jaws
Capacities: 1-3/4" wood, 1/2" steel
Extra-heavy-duty 3-stage gearing
100% ball & needle bearings
Cast aluminum machined gear housing
& bearing plate
Dust sealed switch
Includes operating manual
Shipping Weight: 6 lbs.
Model #
Power
Motor Amps
Motor Watts
Chuck Size
Gear Reduction
Speed (RPM)
Drilling Capacity (Wood)
Drilling Capacity (Steel)
Length (Inches)
Net Weight (Lbs)
Shipping Weight (Lbs)
6615 120 VAC, 50-60 HZ 5.5 660 1/2 3-Stage 0-750 1-3/4" 1/2" 11-1/2 4-3/4 6
Model - 97751: 1/2" Two-Speed-Range Hammer Drill Kit
6 Amps, AC only
Variable speed reversing
Low Speed 0-1,000 RPM
High Speed 0-2,500 RPM
0-20,000 BPM (Low Speed Range)
0-50,000 (High Speed Range)
Capacities:
Low … 3/4" masonry, 1/2" steel, 1"
wood
High … 3/8" masonry, 5/16" steel,
3/4" wood
100% ball and roller bearings
Dust sealed switch
360 degree side handle w/ locking
depth stop
Die-cast & precision machined
metal gear housing
Machined steel chuck
Knob selects hammer-drilling or
drilling mode
Standard Equipment: Chuck Key
#875134, Side Handle #698650, Depth Rod #698992, and operating manual
Shipping Weight: 7 lbs.
Model #
Power
Motor Amps
Motor Watts
No load Speed (RPM)
BPM
Chuck Capacity
Drilling Capacity (Steel)
Drilling Capacity (Concrete)
Drilling Capacity (Wood)
Length (Inches)
Carrying Case
Net Weight (Lbs)
Shipping Weight (Lbs)
97751 120 VAC, 50-60 HZ 6.0 720 0-1,000 Low 0-20,000 Low 1/2" 1/2" Low 3/4" Low 1" Low 13-3/8 No 6 7
Model - 7564: 1/2" Spade Handle Drill
8 Amps, AC only
500 RPM
Reversing
Capacities: 1-3/4" wood, 1/2"steel
Extra-heavy-duty 3-stage gearing
100% ball & needle bearings
Cast aluminum machined gear housing
& bearing plate
Dust sealed switch
Standard Equipment: Chuck Key #
875134, Removable Breast Plate # 811352, Detachable Pipe Handle
#846874, and operating manual
Shipping Weight: 11 lbs.
Model #
Power
Motor Amps
Motor Watts
Chuck Size
Gear Reduction
Speed (RPM)
RT Angle Length
Drilling Capacity (Wood)
Drilling Capacity (Steel)
Length (Inches)
Net Weight (Lbs)
Shipping Weight (Lbs)
7564 120 VAC, 25-60 HZ 8 920 - 3-Stage 500 - 1-3/4" 1/2" 15-1/2 8 11
Model - 9878CS: 14.4 volt Drill/Driver Circular Saw Combo
Kit
14.4 volt, 2 Amp/hour batteries for
more power & longer run time
Interchangeable battery system
power drill, hammer-drill, circular saw, and more.
6" SawBoss Circular Saw
3,000 RPM, premium 6" thin-kerf
18-tooth carbide-tipped Riptide blade, makes up to 80 cross cuts on
2X4" material on a single charge, cuts 2x lumber in one pass, even at
45" bevel.
1/2"Keyless-Chuck Drill
360 in./lbs of maximum torque,
20-position clutch, (0-475 & 0-1,450 RPM)
Standard Equipment: Drill, circular
saw, two high-capacity battery packs, advanced diagnostic charger,
carrying case, and operating manual
Shipping Weight: 20 lbs.
Model - 9884CS: 19.2 Volt Cordless Drill/Driver/Circular
Saw Combo Kit
19.2 volt, 2 Amp/hour batteries for
more power & longer run time
Interchangeable network battery
system powers drill, hammer-drill, circular saw, and more
Includes drill, circular saw, two
high capacity battery packs, advanced diagnostic charger, carrying
case, and operating manual
1/2" Keyless Chuck Drill -- 390
in/lbs of maximum torque, 20-position clutch, (0-500 & 0-1,500 rpm)
6" SawBoss Circular Saw -- 2,600
RPM, premium 6" thin-kerf 18-tooth carbide-tipped Riptide blade, makes
up to 100 cross cuts on 2x4" material on a single charge, cuts 2x
lumber in one pass, even at 45 degree bevel
Shipping Weight: 20 lbs.
Model - 9884:19.2 Volt Cordless Drill/Driver Kit
19.2 volt, 2 Amp/hour batteries for
more power & longer run time
Interchangeable network battery
system powers drill, hammer-drill, circular saw, and more
1/2" keyless chuck with 390
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-500 &
0-1,500 RPM) (0-19,500 BPM)
Includes two high-capacity battery
packs, advanced diagnostic charger, carrying case, double-ended bit
tip, and operating manual
Shipping Weight: 16 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9884 19.2 V 2 382 390 1/2 0-500 0-1,500 10 5-1/2 16
Model - 9887: 19.2 Volt Cordless Hammer Drill Kit
19.2 volt, 2 Amp/hour batteries for
more power & longer run time
Interchangeable network battery
system powers drill, hammer-drill, circular saw, and more
1/2" keyless chuck with 390
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-500 &
0-1,500 RPM) (0-19,500 BPM)
Includes two high-capacity battery
packs, advanced diagnostic charger, carrying case, double-ended bit
tip, and operating manual
Shipping Weight: 16 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9887 19.2 V 2 382 390 1/2 0-500 0-1,500 10 5-1/2 16
Model - 9876: 14.4 Volt 3/8" Cordless Drill Driver Kit
14.4 volt, 2 Amp/hour batteries for
more power & longer run time
1/2" keyless chuck with 360
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-475 &
0-1,450 rpm) (0-18,850 bpm)
Includes two high-capacity battery
packs, advanced diagnostic charger, carrying case, double ended bit
tip, and operating manual
Shipping Weight: 15 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9877 14.4 V 2 331 360 1/2 0-475 & 0-1,450 10 5-1/4 15
Model - 9878: 14.4 Volt 1/2" Cordless Drill/Driver Kit
14.4 volt, 2 Amp/hour batteries for
more power & longer run time
1/2" keyless chuck with 360
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-475 &
0-1,450 rpm) (0-18,850 bpm)
Includes two high-capacity battery
packs, advanced diagnostic charger, carrying case, double ended bit
tip, and operating manual
Shipping Weight: 15 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9878 14.4 V 2 331 360 1/2 0-475 & 0-1,450 10 5-1/4 15
Model - 9866: 12 Volt Cordless Drill/Driver Kit
12 volt, 2 Amp/hour batteries for
more power & longer run time
3/8" keyless chuck with 330
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-400 &
0-1,200 rpm) (0-18,850 bpm)
Includes two high-capacity battery
packs, advanced diagnostic charger, carrying case, double ended bit
tip, and operating manual
Shipping Weight: 14 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9866 12 V 2 250 330 3/8 0-400 & 0-1,200 10 5 14
MSRP:
$297.90
Your Price: $161.00
Model - 9866F: 12 Volt Cordless Drill/Driver Kit w/
Flashlight
12 volt, 2 Amp/hour batteries for
more power & longer run time
3/8" keyless chuck with 330
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-400 &
0-1,200 rpm) (0-18,850 bpm)
Flashlight with high intensity
Xenon bulb
Includes two high-capacity battery
packs, flashlight, advanced diagnostic charger, carrying case, double
ended bit tip, and operating manual
Shipping Weight: 14 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9866F 12 V 2 250 330 3/8 0-400 & 0-1,200 10 5 14
MSRP:
$384.00
Your Price: $188.00
Model - 9877: 14.4 Volt Cordless Hammer Drill Kit
14.4 volt, 2 Amp/hour batteries for
more power & longer run time
1/2" keyless chuck with 360
in./lbs. maximum torque
20 position clutch including solid
lock-up
2-speed gear box (0-475 &
0-1,450 rpm) (0-18,850 bpm)
Includes two high-capacity battery
packs, advanced diagnostic charger, carrying case, double ended bit
tip, and operating manual
Shipping Weight: 15 lbs.
Model #
Power
Amp/Hr Rating
Motor Output Watts
Torque Output (In./Lbs.)
Chuck Size (Inches)
Speed (RPM)
Length (Inches)
Net Weight (Lbs.)
Shipping Weight (Lbs.)
9877 14.4 V 2 331 360 1/2 0-475 & 0-1,450 10 5-1/4 15
Home |Products |Order |Company
Info |Contact
Porter Cable Tool Porter Cable saw 3M Product
